Search found 170 matches
- Sun Mar 24, 2024 3:08 am
- Forum: DA40 Forum
- Topic: Engine overhaul time - Lycoming IO-360-M1A
- Replies: 121
- Views: 42361
Re: Engine overhaul time - Lycoming IO-360-M1A
Do you know if Penn Yan used new Lycoming cylinders or did they overhaul the old ones. They advertise that they are very good at cylinder overhaul. I’m wondering if new cylinders are becoming more available. The price seems good compared to a factory reman engine. Enjoy your new plane!
- Sat Mar 23, 2024 3:57 pm
- Forum: DA40 Forum
- Topic: Prop governor
- Replies: 18
- Views: 1421
Re: Prop governor
The "good news" from MT is that they can repair the prop for $3500. They need 4 working days then it'll be on it's way back to Minnesota. Nothing needs to be sent to Germany. I can keep the shipping crate for $450 or ship it back for more. I plan to keep it here to have on hand. I've only ...
- Thu Mar 21, 2024 9:01 pm
- Forum: DA40 Forum
- Topic: Prop governor
- Replies: 18
- Views: 1421
Re: Prop governor
I agree. MT USA in DeLand is great. No, the prop was overhauled locally, but they were a MT service center. I’ll post some pictures that MT sent me.
- Wed Mar 20, 2024 11:15 pm
- Forum: DA40 Forum
- Topic: Steam DA40 to Glass
- Replies: 22
- Views: 1917
Re: Steam DA40 to Glass
I believe both the EI and JPI monitors accept the signals from the Diamond capacitive senders. I asked Savvy for their advice on a VM1000 replacement and they favored the EDM930. It would obviously have to go on the right side of the panel where the VM1000 is now. Personally I would prefer a GI275 o...
- Wed Mar 20, 2024 11:03 pm
- Forum: DA40 Forum
- Topic: Prop governor
- Replies: 18
- Views: 1421
Re: Prop governor
I heard back from MT USA today. When they opened the prop there was zero grease inside. It was completely dry. The bearings were damaged. They found that a piece of one of the bearing races had broken off. They said they saw signs of heat damage. I'm not sure how this happened. The prop is 390 hrs S...
- Sat Mar 16, 2024 4:08 am
- Forum: DA40 Forum
- Topic: Steam DA40 to Glass
- Replies: 22
- Views: 1917
Re: Steam DA40 to Glass
Garmin is still supporting the the 530W/430W as of today. I just got mine back from the flat rate repair on each. I had some blurred lenses, sticking buttons and a broken fan on the 430W. The cost was low compared to replacement and they work great for me. Hopefully I’ll get a few more years out of ...
- Sat Feb 10, 2024 1:50 am
- Forum: DA40 Forum
- Topic: Prop governor
- Replies: 18
- Views: 1421
Re: Prop governor
The Hartzell 2-blade composite prop is now $25,000. I’m sending my current prop to MT USA in Florida for a faster reseal repair for likely 10% of that cost before considering again the new prop option.
- Sat Feb 10, 2024 1:41 am
- Forum: Hangar Talk
- Topic: Surprise Propeller Motion
- Replies: 7
- Views: 720
Re: Surprise Propeller Motion
How fast does the starter turn the prop? I think it would be slower than the engine, but still probably enough to cause harm. I can imagine a scenario where 2 pilots are doing the preflight with one out in front and the master getting turned on and someone getting hurt. For the engine to take over t...
- Sat Feb 10, 2024 12:04 am
- Forum: Hangar Talk
- Topic: CFI, MEI, 135 etc... just want to talk this out
- Replies: 17
- Views: 1221
Re: CFI, MEI, 135 etc... just want to talk this out
I agree with CFIDave that the KAP140 is inferior to the GFC700, but it’s usable. I’ve flown with both. I also agree with Charles that the pre-G1000 planes are great planes, including for IFR/IMC flight, so if you want something more economical to eliminate or lessen the complexities of leasebacks or...
- Tue Feb 06, 2024 12:22 am
- Forum: DA40 Forum
- Topic: Landing/Taxi lights
- Replies: 35
- Views: 9333
Re: Landing/Taxi lights
No they aren't that much. The lamps were $333 each on my invoice. There were a couple of brackets and misc. parts and about 3 hrs of labor. The total on my invoice was $1,502 for everything. There were 2 lamp model numbers, 01-0771125-20 and 01-0771125-23. Hope this helps.