Search found 28 matches
- Sat Feb 17, 2024 10:43 pm
- Forum: DA40 Forum
- Topic: DA40NG - First year of ownership update
- Replies: 8
- Views: 525
Re: DA40NG - First year of ownership update
The vibration could be from tires that are out of round... easily caused by lots of touch and gos with hard breaking and other low hour pilot time stuff... (My airplane has had a hard way to go with tires... ) IFR = ASAP!!! most important thing you can do (in my opinion) Im curious how many hours y...
- Sat Feb 17, 2024 1:10 am
- Forum: DA40 Forum
- Topic: DA40NG - First year of ownership update
- Replies: 8
- Views: 525
Re: DA40NG - First year of ownership update
Bunch of random issues with the nosewheel as I had the AME look it over every time it was in service to get to the bottom of the vibration issue. - Castoring fork was loose. Tightened, no effect on vibrations. - Steering stop was bent - likely mishandling by the ground crew when towing. Was fixed an...
- Fri Feb 16, 2024 11:23 pm
- Forum: DA40 Forum
- Topic: DA40NG - First year of ownership update
- Replies: 8
- Views: 525
DA40NG - First year of ownership update
My background: Licensed since 2009 (PPL, night, multi). Didn't do much flying until 2022 as keeping rental currency was a pain in the ass, and I could only stand so many "sightseeing flights". Had ~150hrs TT before 2022. Flew buddy's SR22T for a couple dozen hours while waiting for deliver...
- Fri Feb 16, 2024 10:10 pm
- Forum: Austro
- Topic: MSB-E4-042 - Crankshaft-bearing cap screws replacement
- Replies: 96
- Views: 9355
Re: MSB-E4-042 - Crankshaft-bearing cap screws replacement
Just picked up my plane from the shop. Was told that total work time was ~15hrs. They had to source engine sealant from a local Benz dealership.
- Thu Feb 01, 2024 9:23 pm
- Forum: Austro
- Topic: MSB-E4-042 - Crankshaft-bearing cap screws replacement
- Replies: 96
- Views: 9355
Re: MSB-E4-042 - Crankshaft-bearing cap screws replacement
Just spoke to the AME, apparently they still lack the exact instructions on how to proceed, which are being revised right now by the factory.
I was told this is going to be ~20hrs of labor for a DA40.
I was told this is going to be ~20hrs of labor for a DA40.
- Thu Feb 01, 2024 2:51 pm
- Forum: Austro
- Topic: MSB-E4-042 - Crankshaft-bearing cap screws replacement
- Replies: 96
- Views: 9355
MSB-E4-042 - Crankshaft-bearing cap screws replacement
Get ready folks, this is about to get issued. Seems to affect most/all E4 Series engines. Occurrences of E4 series engines have been reported recently. Investigation of the occurrences has shown in some cases the failure of one inner main bearing screw. Subsequent investigations have determined that...
- Sun Apr 30, 2023 5:07 pm
- Forum: DA40 Forum
- Topic: Jumping oil pressure
- Replies: 2
- Views: 525
Re: Jumping oil pressure
Okay, looks like I got some warranty claims in my future.
- Sat Apr 29, 2023 5:03 pm
- Forum: DA40 Forum
- Topic: Jumping oil pressure
- Replies: 2
- Views: 525
Jumping oil pressure
Hey folks, I got just ~20hrs in a new DA40NG, and on my last (well, first ever) cross country I notice the oil pressure indicator jumping around by +/-0.2 from 4.7 bar. It's mostly +/- 0.1, but sometime hits 0.2. This happens multiple times a second, so the "needle" on the G1000 swings wil...
- Wed Apr 26, 2023 2:56 pm
- Forum: DA40 Forum
- Topic: Electronic checklist update voodoo
- Replies: 16
- Views: 2189
Re: Electronic checklist update voodoo
Alan, you are a genius. I just tried your flow and it worked. First ON -> N/A checklist on startup screen Second ON -> N/A checklist on startup screen Third ON -> Random checklist name on startup screen (not checklist.gcl which is on the SD) And it actually updated here. I'm from the software world,...
- Tue Apr 25, 2023 8:12 pm
- Forum: DA40 Forum
- Topic: Electronic checklist update voodoo
- Replies: 16
- Views: 2189
Electronic checklist update voodoo
Hey folks, I've been tweaking the official NXI electronic checklist from here: https://www.diamondaircraft.com/en/service-and-support/diamond-flight-training/checklists/ Fixing all the bad formatting, removing redundant items, while adding my own to the flow. For the most part it's been OK, however ...