diamondaviators.net

Enrouk

Enrouk

: on my aircraft i choose 3d effect, before you are ready to put the vinyl, put some piece temperature water in a clean spray bottle with a spoon of kitchen soap... mixte them, spray them on the desired selected area wher you want you vinyl, after this, remove the film slowly, be carfull to not drop it or page to fold and touch eatch other. they have some static on it, so they help a lot when you remove the film, spay some water and soap on it, they remove all static, afther this put it on the aircraft, take you time to put it where you want it, slowly push the to the skinn of the aircraft, with water and soap on it, you have a few minute to make adjustement to have level and athe place you want it.... if you see they stat to not move, and you need to remove them, take on corner, adn pull fast for a brief moment and the vinyl strip will be remove, you put again water on the surface and start again,

: slowly, start to remove some buble air, starting from the midle to the top to botom, until you can see you remove all them most posible, but do it slowly ly, like baby step.... after this take the heat gun anf make some heat on it, but dont put the gun to close to the vinyl, you can burn it, move the gun alway dont stay at the same spot, when they stat to be a litle be hot than the pieac tempature, remve againe all buble air slowly, after this remove the protective filme, put some water and sop on hte vinyl and you can do the same procees to remove all buble air.....

Enrouk

Hi guys, some of you ask to see how i to do it, so here is a few picture i take specialy for you, see step by step and how i work, its a great pleasure to explain it to you,

: Here is the aircraft before i start the work on it, first step, make a normal wash on it with soap, remove all bug, oil and other dirty thing on the aircraft.

: After the aircraft is dry, you can take heat gun to make some heat on the old vinyl stripe, but do heat them to mutch, start slowly and you will find how hot temperature you need to remove it.

: Some color of vinyl strip on original Diamond the blue specalit make some crack and its a long an long painful process to remove it by hane and heat gun, so we buy this tool, its in full rubber, you can put it a drill, put them on the stripe adn voila, but do turn it to fast, you can burn the paint, start slowly, they remove almost all glue at the same time

: and i polish all window inside and outside, with 3m special compund fr car headlight, a smooth buffering and low speed, i made all this in 2 hours. when i got it i put the glass at 4/10 and now after the project its 9/10 a big differance,

: i put propeler protective tape

: to remove alll excess of glue, you can use hydrat emytyl alchool, but not to much, .... after this you need make some buffering with step by step process, i use alway Meguiar's marine and rv product, i start with the oxidation remover, after this if i saw some scratch, i use ruff copound on some spot, step 2 more light cumpound, ultra light compound and anti swirl, after its a high gloss polish.... you have to do this job inside a hangard for best result with flusforesent roof light, int he reflect you can see better on the surface of the skin how clean they are or scratch.... when done, you are ready to put your vinyl stripe

Enrouk

Wow, interesting reading here, thanks for this great information, so im looking everything in a positive way to proceed to my order, and i have the aluminuim hartzell F7497, so im good to go, and i will let a autorized powerflow shop to put it on my aircraft, and at the moment they have great discou...

Enrouk

I guys,

im consideirng to put a poer flow systeme on my da-40, they have a great specail at this time if i put the order before the 31 august,

do you have good or bad coment about this STC.....

Enrouk

in Quebec, Canada

Enrouk

sorry for the delay, i was bussy to work on my project, i have take a few picutre for you guys, let me see this and i will post some picture on the project and how to remove old vynil stripe, how to clean and prep the Aircraft to receive new vynil decal and how to do it....

Enrouk

all vinyl decal, no paint... i like to change look sometime, and its easy and cheap....

Enrouk

Hi Guys, here is a preview of my exterior look, wath do you think....

Enrouk

C-FWSH, just finished the refurb process, now lest fly.....

Search found 53 matches

Re: Da-40 Paint Sheme

Re: Da-40 Paint Sheme

Re: Da-40 Paint Sheme

Re: Power Flow

Power Flow

Re: Prop overal and other thecincal question

Re: Da-40 Paint Sheme

Re: Da-40 Paint Sheme

Da-40 Paint Sheme

C-FWSH now in flying status