Page 1 of 1

G1000 NXi: system config error (?)

Posted: Mon Jun 07, 2021 9:00 pm
by Pehu
Hi all,

I thought I'd ask here for guidance before turning (my wallet) to Garmin service. I took my DA62 home from the factory a month ago and noticed that the audio panel needed some configuration. There were posts here describing how this should be done and where to find the settings. So I put the system to maintenance mode and changed the audio settings: now bluetooth works and midrow/backrow can hear the radios as well. I didn't change anything else.

Now after booting the avionics / electric master on, I get this message: SYSTEM CONFIG - System config error. Config service req'd.

Any idea who to get rid of that? Or only through garmin service center? Everything works well and there is nothing wrong with avionics, audio or anything. Just a bit nuisance to have this error on the messages all the time.

Image of the error added here:
https://www.dropbox.com/s/hwydkp0a0p1k8 ... 000nxi.jpg

(not sure how to properly attach it here, but opening the image to a separate tab/window seems to show it all)

Re: G1000 NXi: system config error (?)

Posted: Wed Jun 09, 2021 9:26 pm
by CFIDave
Pehu wrote: Mon Jun 07, 2021 9:00 pmNow after booting the avionics / electric master on, I get this message: SYSTEM CONFIG - System config error. Config service req'd.

Any idea who to get rid of that?
Yes, you forgot one final step -- you're not the first to forget that: :)

Go back into G1000 configuration (maintenance) mode and go to the Configuration Manager page. There you need to confirm all of the configuration changes you made earlier by hitting the CNFM CFG softkey (that backs up the LRU configuration changes you made earlier into the Master Configuration Module). Cycle the power back into user mode, and you should be good to go with no more alerts.

Re: G1000 NXi: system config error (?)

Posted: Thu Jun 10, 2021 9:38 am
by Pehu
This helped & solved the problem. Many thanks :)

Re: G1000 NXi: system config error (?)

Posted: Sat Jun 12, 2021 1:31 am
by KTZ Pilot
How can I access the configuration or maintenance mode for the G1000nxi?

Re: G1000 NXi: system config error (?)

Posted: Sat Jun 12, 2021 7:12 pm
by Boatguy
Here is the G1000 maint manual and the NXi supplement. Enjoy!

https://1drv.ms/u/s!AvDxwIigp7Le8DnXt2W ... l?e=aW21jx