Has anyone had work done on their plane in London, Ontario?
I need to replace the canopy. While that is happening I would sort of like them to do the wing spar AD and replace the stickers (it's been ten years).
Does someone have a current contact up there? And know if they hate having to work on an owner's plane or if they think it's a fine thing for a couple workers to do for a few days?
Thanks,
Factory Work
Moderators: Rick, Lance Murray
- Colin
- 5 Diamonds Member
- Posts: 2006
- Joined: Sat Aug 21, 2010 8:37 pm
- First Name: Colin
- Aircraft Type: DA42
- Aircraft Registration: N972RD
- Airports: KFHR
- Has thanked: 319 times
- Been thanked: 527 times
Factory Work
Colin Summers, PP Multi-Engine IFR, ~3,000hrs
colin@mightycheese.com * send email rather than PM
http://www.flyingsummers.com
N972RD DA42 G1000 2.0 s/n 42.AC100 (sold!)
N971RD DA40 G1000 s/n 40.508 (traded)
colin@mightycheese.com * send email rather than PM
http://www.flyingsummers.com
N972RD DA42 G1000 2.0 s/n 42.AC100 (sold!)
N971RD DA40 G1000 s/n 40.508 (traded)
- Wasco
- 2 Diamonds Member
- Posts: 12
- Joined: Sun Jun 02, 2013 6:26 pm
- First Name: Ormand
- Aircraft Type: DA40
- Airports:
- Has thanked: 1 time
Re: Factory Work
I had a heavily damaged rear door that was refurbished by Xu Aviation at London, Ontario this past summer. The lead time at Diamond was 6-8 weeks and they recommended Xu Aviation which is a Diamond Service center. Work was 2-3 weeks and the door looked like new when it was finished.
Ormand
Ormand
- JimP
- 2 Diamonds Member
- Posts: 28
- Joined: Mon Jul 18, 2011 4:26 pm
- First Name: Jim
- Aircraft Type: DA40
- Aircraft Registration: N239DS
- Airports: KANE
- Has thanked: 4 times
- Been thanked: 4 times
Re: Factory Work
I was going to do my annual, prop rebuild and a few other things along with the wing spar there in December. I worked with Adriaan (Ed) Hollestelle (ahollestelle@diamondair.com) to get an estimate. It sounded like they regularly work directly with owners. He was very helpful but with the prop, the timing didn't work. I am nearing 1000 hours and I was thinking there were some items that needed a 1000 hour inspection. When I sort that our, I hope to take it to the factory for that and have them do the wing spar at that time.
Jim
2007 DA40
2007 DA40
- Charbie
- 3 Diamonds Member
- Posts: 55
- Joined: Sun Feb 02, 2014 9:43 pm
- First Name: Charbel
- Aircraft Type: DA40
- Aircraft Registration: GLXL
- Airports: CZBA
- Has thanked: 21 times
- Been thanked: 6 times
Re: Factory Work
Colin, XU does a lot of work on composites and repaired my rudder for the previous owner when it was damaged during an annual. Excellent workmanship. It's a 30 minute flight from my home airport. Let me know if you need anything local while you're here.
2007 DA40 XL , CZBA, Burlington, Ontario, Canada
- CFIDave
- 5 Diamonds Member
- Posts: 2678
- Joined: Wed Nov 07, 2012 3:40 pm
- First Name: Dave
- Aircraft Type: OTHER
- Aircraft Registration: N333GX
- Airports: KJYO Leesburg VA
- Has thanked: 231 times
- Been thanked: 1473 times
Re: Factory Work
Use custsupp@diamondair.com for your request. You'll probably hear back within 24 hours unless it's a Canadian holiday.Colin wrote:Does someone have a current contact up there?
Diamond Canada has a maintenance and repair shop that (for regulatory reasons) is a totally separate organization from their new aircraft manufacturing, even if they operate side-by-side in the same building. They not only provide warranty work for new aircraft (I've used them), equipment installation and modifications, they can also provide more routine services such as annual inspections for Diamond aircraft.
Epic Aircraft E1000 GX
Former DA40XLS, DA42-VI, and DA62 owner
ATP, CFI, CFI-I, MEI
Former DA40XLS, DA42-VI, and DA62 owner
ATP, CFI, CFI-I, MEI