Source for the DA40 plastic brake hose holders?

Any DA40 related topics

Moderators: Rick, Lance Murray

User avatar
Ultrapilot1
3 Diamonds Member
3 Diamonds Member
Posts: 118
Joined: Wed Nov 12, 2014 9:19 pm
First Name: Steven
Aircraft Type: DA40
Aircraft Registration: N446SB
Airports: KPIE KTHA
Has thanked: 20 times
Been thanked: 12 times

Re: Source for the DA40 plastic brake hose holders?

Post by Ultrapilot1 »

I think I will run off a few on my 3D printer. My A&P has no problem signing off on them since it's better than vinyl taping the lines. Just studying which material to use (most likely ASA, which is a UV stable version of ABS or Nylon 66). Use 3M VHB tape to secure legs to landing gear.
User avatar
Ultrapilot1
3 Diamonds Member
3 Diamonds Member
Posts: 118
Joined: Wed Nov 12, 2014 9:19 pm
First Name: Steven
Aircraft Type: DA40
Aircraft Registration: N446SB
Airports: KPIE KTHA
Has thanked: 20 times
Been thanked: 12 times

Re: Source for the DA40 plastic brake hose holders?

Post by Ultrapilot1 »

Decided to run off a few on my 3D printer using ASA (Acrylonitirle Styrene Acrylate) a UV-resistant engineering-grade weatherable polymer. My A&P is satisfied with that and prefers it over tape.
User avatar
Ultrapilot1
3 Diamonds Member
3 Diamonds Member
Posts: 118
Joined: Wed Nov 12, 2014 9:19 pm
First Name: Steven
Aircraft Type: DA40
Aircraft Registration: N446SB
Airports: KPIE KTHA
Has thanked: 20 times
Been thanked: 12 times

Re: Source for the DA40 plastic brake hose holders?

Post by Ultrapilot1 »

I am producing them using a 3D printer and material is ASA very high resistance against UV and yellowing. My metal brake cables snap right in. Much better looking than electrical tape.
User avatar
Tipo815
3 Diamonds Member
3 Diamonds Member
Posts: 56
Joined: Thu Jun 28, 2012 5:20 pm
First Name: Jeffrey
Aircraft Type: DA40
Aircraft Registration: N648DS
Airports: KSNA
Has thanked: 1 time
Been thanked: 7 times

Re: Source for the DA40 plastic brake hose holders?

Post by Tipo815 »

Ultrapilot1 wrote: Tue Oct 02, 2018 8:50 pm I am producing them using a 3D printer and material is ASA very high resistance against UV and yellowing. My metal brake cables snap right in. Much better looking than electrical tape.
Steve - Many thanks for sending me the brake line clips. Very nice work indeed! They look (and feel) like a quality piece and should work perfectly. I know some people use tape and I was using zip ties for a while. But these are definitely the way to go! Appreciate you putting in the time to make a set for me! Could not find a way to post a pic but perhaps you could do so to allow others to see your work.
User avatar
Ultrapilot1
3 Diamonds Member
3 Diamonds Member
Posts: 118
Joined: Wed Nov 12, 2014 9:19 pm
First Name: Steven
Aircraft Type: DA40
Aircraft Registration: N446SB
Airports: KPIE KTHA
Has thanked: 20 times
Been thanked: 12 times

Re: Source for the DA40 plastic brake hose holders?

Post by Ultrapilot1 »

FC8F9E6B-EF9C-49DC-801D-54AC035CFB94.jpeg
Here are some photos
Attachments
7DB844DE-352A-4114-A9F4-A4C51AABE76A.jpeg
User avatar
Boatguy
5 Diamonds Member
5 Diamonds Member
Posts: 1827
Joined: Mon Jan 22, 2018 4:48 am
First Name: Russ
Aircraft Type: DA62
Aircraft Registration: N962M
Airports: KSTS
Has thanked: 1327 times
Been thanked: 1163 times

Re: Source for the DA40 plastic brake hose holders?

Post by Boatguy »

Lance Murray wrote: Sat Jun 23, 2018 3:46 am Get a roll of silicone fusion tape. Works great and looks fine.

http://www.aircraftspruce.com/catalog/a ... niwrap.php
This is a great product, but not permanent. You’ll need to replace the tape depending on UV and temp. But it’s certainly a simple solution and more adaptable than fixed brackets.
User avatar
Ultrapilot1
3 Diamonds Member
3 Diamonds Member
Posts: 118
Joined: Wed Nov 12, 2014 9:19 pm
First Name: Steven
Aircraft Type: DA40
Aircraft Registration: N446SB
Airports: KPIE KTHA
Has thanked: 20 times
Been thanked: 12 times

Re: Source for the DA40 plastic brake hose holders?

Post by Ultrapilot1 »

I originally used the fusion tape but it was difficult because it starts to "roll up" as you slide the brake line hold holder onto the landing leg unless you spread the mounting "ears". It is also thick especially after you put it on both sides. I prefer LIQUID NAILS® FUZE*IT available in any DIY store (Home D Lowes etc.). Doesn't harden and has a strong grip. Another product is 3M 5200 but removal is very difficult and it will take some of the paint with it. Mine are on approximately six months and are fine. They survived 123 deg. at Death Valley!
Post Reply