Using Stratus 2 or 3 + FF I don't see those extraneous fields. Maybe a side-effect of Scout as the receiver?
I do have an anomaly I've reported to Foreflight and sent them logs: When ADS-B 1090 ES targets are near a ground station (in particular, the one near Bend, OR), and you open up the target detail the target will flop back and forth between 1090 ES and UAT TIS-B). This isn't even noticeable unless you elect to look at the detail. I'm using Stratus 3 + latest FF.
As far as I can see it's the proximity of the target to the tower, not my proximity to either the target or the GS. But this is a snapshot observation on my part and may not be 100% true.
BTW, I've noticed a fairly high number of ADS-B aircraft whose Ground mode is not correctly configured OR the pilot is not enabling on the ground.
ADS-B Traffic target problem
Moderators: Rick, Lance Murray
- Rich
- 5 Diamonds Member
- Posts: 4604
- Joined: Mon Aug 30, 2010 12:40 pm
- First Name: Rich
- Aircraft Type: DA40
- Aircraft Registration: N40XE
- Airports: S39 Prineville OR
- Has thanked: 145 times
- Been thanked: 1186 times
Re: ADS-B Traffic target problem
2002 DA40-180: MT, PowerFlow, 530W/430W, KAP140, ext. baggage, 1090 ES out, 2646 MTOW, 40gal., Surefly, Flightstream 210, Orion 600 LED, XeVision, Aspen E5
- smoss
- 5 Diamonds Member
- Posts: 744
- Joined: Sun Dec 12, 2010 12:18 am
- First Name: Steve
- Aircraft Type: DA40
- Airports: KVGT
- Has thanked: 58 times
- Been thanked: 134 times
Re: ADS-B Traffic target problem
Thanks for the ground mode info Rich, that may well be the issue While I have a Scout also, I only used it for backup checking of the info. My main receiver now is the GTX345r and that is where the blank fields show from. The Scout/FF do not ever produce such fields.
Steve
DA40 XL
DA40 XL