Hello guys,
I’m trying to change the wire of the pitch lever that broke yesterday.
But I don’t know how to access this area?! I think that I have unscrew all what I can remove but it is still not enough.
Here is a picture in case you can help me!
How to access the pitch lever to change the cable ?
Moderators: Rick, Lance Murray
- astaib
- 5 Diamonds Member
- Posts: 616
- Joined: Mon Feb 26, 2018 9:00 pm
- First Name: Arnaud
- Aircraft Type: DA40
- Aircraft Registration: FGNJX
- Airports: LFPX
- Has thanked: 244 times
- Been thanked: 51 times
How to access the pitch lever to change the cable ?
Arnaud
DA40 Star 180 / 40.026 / 2001
Wingtip, landing and taxing LED (Whelen)
Skitube
GNS430 NON-WAAS
Steam gauges
Non certified ADS-b
DA40 Star 180 / 40.026 / 2001
Wingtip, landing and taxing LED (Whelen)
Skitube
GNS430 NON-WAAS
Steam gauges
Non certified ADS-b
- Steve
- 5 Diamonds Member
- Posts: 1953
- Joined: Thu Aug 12, 2010 1:23 am
- First Name: Steve
- Aircraft Type: DA40
- Aircraft Registration: N432SC
- Airports: 1T7
- Has thanked: 81 times
- Been thanked: 493 times
Re: How to access the pitch lever to change the cable ?
It is a tight area, but you probably slip a wrench in there to loosen (not remove) the bolt that secures the wire. Then do the same on the prop governor in the engine compartment. Pull the wire out from the engine side. Reverse with the new wire. It will probably be difficult to slip it into the hole on the bolt, you may need some long needle-nosed pliers to help.
Steve
Steve
- astaib
- 5 Diamonds Member
- Posts: 616
- Joined: Mon Feb 26, 2018 9:00 pm
- First Name: Arnaud
- Aircraft Type: DA40
- Aircraft Registration: FGNJX
- Airports: LFPX
- Has thanked: 244 times
- Been thanked: 51 times
Re: How to access the pitch lever to change the cable ?
This was one of my idea also. And what about removing the right seat ?
Arnaud
DA40 Star 180 / 40.026 / 2001
Wingtip, landing and taxing LED (Whelen)
Skitube
GNS430 NON-WAAS
Steam gauges
Non certified ADS-b
DA40 Star 180 / 40.026 / 2001
Wingtip, landing and taxing LED (Whelen)
Skitube
GNS430 NON-WAAS
Steam gauges
Non certified ADS-b
- Rich
- 5 Diamonds Member
- Posts: 4592
- Joined: Mon Aug 30, 2010 12:40 pm
- First Name: Rich
- Aircraft Type: DA40
- Aircraft Registration: N40XE
- Airports: S39 Prineville OR
- Has thanked: 145 times
- Been thanked: 1180 times
Re: How to access the pitch lever to change the cable ?
Offhand I think removing the left seat will give you an additional angle to get at the little clamping thing. And perhaps help you fish it out when you drop it or some tool you're using
2002 DA40-180: MT, PowerFlow, 530W/430W, KAP140, ext. baggage, 1090 ES out, 2646 MTOW, 40gal., Surefly, Flightstream 210, Orion 600 LED, XeVision, Aspen E5
- Don
- 4 Diamonds Member
- Posts: 377
- Joined: Tue Jul 06, 2010 9:15 pm
- First Name: Don
- Aircraft Type: DA40
- Aircraft Registration: N623DS
- Airports: KTOA
- Has thanked: 123 times
- Been thanked: 162 times
Re: How to access the pitch lever to change the cable ?
Shouldn't this cable replacement job be done by a professional A&P? Just sayin.
Diamond Star XLS, N623DS, SN40.1076