G1000 and 8.33 frequencies missing
Posted: Wed Mar 13, 2019 9:30 am
Hello,
I have an issue with Database update on G1000.
Since last update (March), I don't have the 8.33 kHz frequencies available anymore on the WPT pages.
I contacted Jepp to get a new upload file, which they gave me with some instructions to reload the Database:
I have an issue with Database update on G1000.
Since last update (March), I don't have the 8.33 kHz frequencies available anymore on the WPT pages.
I contacted Jepp to get a new upload file, which they gave me with some instructions to reload the Database:
It did not work (there is no softkey before startup and pushing the 2nd left hardkey doesn't do anything). So I called my avionics shop and had this answer:I have reset your download counter and provided an extra. The extra download is there in case the issue persists and you have to contact Garmin and they instruct you to reload. This is to say do not program the card twice from the same download.
To see this download please clear the cache in JDM. To clear your cache go to the JDM menu in the top left -> Tech Support -> clear cache. It will ask you if you are sure you want to delete local data then have you log in again. Afterwards, please transfer the data to your device again. When you get to the unit it may not want to update the NavData. Attempt it once but if the unit skips updating power it off, then with the Nav card inserted hold the second from the left soft key in while booting up. This will allow you to fully reinstall the database into the unit.
If issues persist I recommend you contact Garmin to troubleshoot unit display issues.
Does anyone have the same issue ?Please find attached the Service Advisory 1865A from Garmin.
Here you can see that the G1000 PFD-MFD (GDU) softw. version should be 15.10 or higher
As far as I can see, has N446DC G1000 softw version 0321-22 this is the Highest version available for a non-Waas DA40-180. This gives a GDU(PFD-MFD) softw. 9.15
(for Waas equipt DA40-180 0321-23 is the highest available softw this has GDU softw. 12.05)
In both cases there is no solution. There is no softw available for a DA40-180 to display the 8.33khz frequencies, Sorry !!!!!!!.
The Softw. should come from Diamond.