Have you damaged your DA40 prop during ground handling?

Group opinion recorded by the community.

Moderators: Rick, Lance Murray

Post Reply

Have you "boinked" your DA40 prop during ground handling?

No (always careful)
33
79%
No (yet another reason to have a Hartzell)
4
10%
Yes, once (fast learner)
5
12%
Yes, several times (slow learner)
0
No votes
Yes, even though I have a Hartzell (special needs!)
0
No votes
 
Total votes: 42
User avatar
Chris B
5 Diamonds Member
5 Diamonds Member
Posts: 846
Joined: Wed Sep 26, 2012 1:52 am
First Name: Chris
Aircraft Type: DA40
Aircraft Registration: N171CB
Airports: KSJC
Has thanked: 210 times
Been thanked: 221 times

Have you damaged your DA40 prop during ground handling?

Post by Chris B »

I've recently been reviewing the logs of several used DA40's. A surprisingly common theme is MT prop damage during ground handling. I've also heard one DA40 owner say that "it is easy to get away from you" and ding the three blade prop with the tow bar. Apparently the freewheeling nose wheel + low ground clearance combination creates problems for the unwary.

I'm curious if this is a widespread issue.

But I especially want to learn best practices for ground handling.

Chris
User avatar
Gnomad
4 Diamonds Member
4 Diamonds Member
Posts: 451
Joined: Fri Dec 30, 2011 9:30 pm
First Name: Eric
Aircraft Type: DA42-VI
Aircraft Registration: N61EP
Airports: KEQY
Has thanked: 12 times
Been thanked: 48 times

Re: Have you damaged your DA40 prop during ground handling?

Post by Gnomad »

*knocks on wood* after voting no. ;)
Eric


DA42.N121 (Sold!)
DA40.1136 (Sold!)
Charlotte, NC (KEQY)

My Diamond Flight Videos: http://www.youtube.com/user/eparker99a
User avatar
markmed
1 Diamond Member
1 Diamond Member
Posts: 1
Joined: Sun Dec 11, 2011 3:55 am
First Name: Ron
Aircraft Type: DA40
Aircraft Registration: N608DS
Airports: KHND

Re: Have you damaged your DA40 prop during ground handling?

Post by markmed »

Yes... We picked up a rock @ Grand Coulee airport...They have great concrete runways but no sweepe/cleaner. Everything held together over the N. Cascades...about 200mi. worst terrain in America. The tear (2 cracks & bent lead edge) was 2" above the Ti bar. Whoo!
User avatar
Chris B
5 Diamonds Member
5 Diamonds Member
Posts: 846
Joined: Wed Sep 26, 2012 1:52 am
First Name: Chris
Aircraft Type: DA40
Aircraft Registration: N171CB
Airports: KSJC
Has thanked: 210 times
Been thanked: 221 times

Re: Have you damaged your DA40 prop during ground handling?

Post by Chris B »

Well, the results of this poll suggest that either:
A) The owners of most of my prospective aircraft were, well... clumsy.
or,
B) With only 14 votes on this poll, most of the people who did *not* vote are... clumsy. :D

In any case, I bought a plane with an aluminum Hartzell. So even if (when?) I go into full-on Klutz mode, the prop should escape unscathed!

Chris
User avatar
jwx96
4 Diamonds Member
4 Diamonds Member
Posts: 247
Joined: Mon Jul 22, 2019 9:54 pm
First Name: John
Aircraft Type: DA40
Aircraft Registration: N193JP
Airports: KFCM
Has thanked: 108 times
Been thanked: 61 times

Re: Have you damaged your DA40 prop during ground handling?

Post by jwx96 »

I haven't had my prop (MTV-12-B) damaged during ground handling, but I always rotate it by hand into a position to minimize the chance. I have had the backside dinged and gouged by mechanics decowling for maintenance. The solution was to buy a set of BladeSox which are neoprene covers.
User avatar
Boatguy
5 Diamonds Member
5 Diamonds Member
Posts: 2070
Joined: Mon Jan 22, 2018 4:48 am
First Name: Russ
Aircraft Type: DA62
Aircraft Registration: N962M
Airports: KSTS
Has thanked: 1568 times
Been thanked: 1385 times

Re: Have you damaged your DA40 prop during ground handling?

Post by Boatguy »

I have picked up rocks which dinged my prop, but I assumed that you meant moving the plane with the engine off. Like others, I rotate the prop out of the way before connecting my tug or the tow bar.
User avatar
antoinemo
1 Diamond Member
1 Diamond Member
Posts: 7
Joined: Sat Aug 07, 2021 5:43 pm
First Name: Antoine
Aircraft Type: DA40
Aircraft Registration: N949KC
Airports: KCDW
Been thanked: 4 times

Re: Have you damaged your DA40 prop during ground handling?

Post by antoinemo »

I thought I would add to this, as our prop is back from blade repair at MT in Florida. We had a crack on the metal leading edge. The plane is operated in a club environment so we're not sure exactly what happened. MT's best guess is indeed ground handling. They say it's the most probable cause for a crack like ours. Pushing and/or pulling on the prop outside of the very root of the blade. Total for the repair was $2,200 + shipping.

Image
Post Reply