Exhaust valve problem options

Any DA40 related topics

Moderators: Rick, Lance Murray

Post Reply
User avatar
blsewardjr
3 Diamonds Member
3 Diamonds Member
FIRST NAME: Bernie
Aircraft: DA40
Registration: N377DS
Airport: KCHO

Posts: 178
Joined: Tue Jul 26, 2011 11:19 pm
Has thanked: 26 times
Been thanked: 31 times

Exhaust valve problem options

Post by blsewardjr » Sat Feb 09, 2019 8:06 pm

During my annual this week my mechanic discovered that my #1 cylinder had a compression of 45/80 warm. Upon borescoping it he found that the exhaust valve was showing early signs of wear. Faced with pulling the cylinder to the tune of several AMUs, he offered the option of "lapping" it. The operation was successful, getting the compression up to 63/80 cold. We're going to look at it again in 25 hours. My mechanic runs a podcast on aircraft maintenance and I was the subject this week. If you're interested it's at http://airplaneownermaintenance.com/109 ... od-option/ Bernie
Bernie Seward, IR, AGI
2003 DA40 N377DS
KCHO Charlottesville, VA
User avatar
waynemcc999
3 Diamonds Member
3 Diamonds Member
FIRST NAME: Wayne
Aircraft: DA40
Registration: N211WP
Airport: KSBA

Posts: 65
Joined: Sun Jun 08, 2014 3:38 pm
Has thanked: 298 times
Been thanked: 19 times

Re: Exhaust valve problem options

Post by waynemcc999 » Sat Feb 09, 2019 9:00 pm

At my last annual, I had a burnt exhaust valve... decided to replace with a new full cylinder kit at cost of $1200 parts and a few hundred dollars labor. At the time the aircraft had 1800 tach hours and that was the first valve problem and therefore first cylinder replacement.
Last edited by waynemcc999 on Sat Feb 09, 2019 10:40 pm, edited 1 time in total.
Wayne McClelland
PPL/IR, 2008 Diamond Star DA40-XLS 40.922, KSBA
Photo logs of PilotsNPaws Trips | Flying Doctors Trips | Angel Flight Trips | Cuba 2016 | Colombia 2018
User avatar
Hans
3 Diamonds Member
3 Diamonds Member
FIRST NAME: Hans Wiederkehr
Aircraft: DA40
Airport: HWV

Posts: 122
Joined: Tue Mar 15, 2011 12:25 am
Has thanked: 1 time
Been thanked: 1 time

Re: Exhaust valve problem options

Post by Hans » Sat Feb 09, 2019 10:23 pm

How many hours on engine ?
User avatar
blsewardjr
3 Diamonds Member
3 Diamonds Member
FIRST NAME: Bernie
Aircraft: DA40
Registration: N377DS
Airport: KCHO

Posts: 178
Joined: Tue Jul 26, 2011 11:19 pm
Has thanked: 26 times
Been thanked: 31 times

Re: Exhaust valve problem options

Post by blsewardjr » Sun Feb 10, 2019 2:02 am

650
Bernie Seward, IR, AGI
2003 DA40 N377DS
KCHO Charlottesville, VA
User avatar
Pilot55
2 Diamonds Member
2 Diamonds Member
FIRST NAME: Bret
Aircraft: DA40
Registration: N266ds

Posts: 28
Joined: Sat Mar 18, 2017 2:39 pm
Been thanked: 7 times

Re: Exhaust valve problem options

Post by Pilot55 » Mon Feb 11, 2019 1:56 am

Usually the valve seat problem starts with valve guide wear. The valve now does not stay concentric with the seat and when the valve is seated does not make enough contact with the seat to pull the heat out of the valve. It also puts higher point loading on a smaller area of the seat and causes the seat and the valve to pound out in that area. The lapping will help for a period of time but if the seat is worn it will return.
User avatar
blsewardjr
3 Diamonds Member
3 Diamonds Member
FIRST NAME: Bernie
Aircraft: DA40
Registration: N377DS
Airport: KCHO

Posts: 178
Joined: Tue Jul 26, 2011 11:19 pm
Has thanked: 26 times
Been thanked: 31 times

Re: Exhaust valve problem options

Post by blsewardjr » Mon Feb 11, 2019 2:08 am

Bret- That what my research revealed as well so I had my mechanic check the guides. He says he didn't find any slop in them. That said, I agree that the problem will probably eventually return. Nonetheless I'm trying to follow Savvy's Mike Busch's advice to do whatever you can before pulling the cylinder. Busch believes that pulling cylinders can, if you're not extremely careful, result in much more serious engine problems. See
https://www.savvyaviation.com/wp-conten ... afraid.pdf Bernie
Bernie Seward, IR, AGI
2003 DA40 N377DS
KCHO Charlottesville, VA
User avatar
ZAV
2 Diamonds Member
2 Diamonds Member
FIRST NAME: Bryan
Aircraft: DA40
Registration: N387DS
Airport: KLEX

Posts: 17
Joined: Sun Nov 04, 2018 1:40 am
Has thanked: 5 times
Been thanked: 3 times

Re: Exhaust valve problem options

Post by ZAV » Mon Feb 11, 2019 2:53 am

That was a scary article.
Post Reply