Hi,
What do you guys think about the edm 900 location. To me this setup looks a little weird. The aircraft is still in the avionics shop. Originally I was thinking to install edm 900 vertically, but I guess horizontal placement is easier to read. Any ideas, comments would be much appreciated.
Thank you!
Avionics upgrade and edm 900 location.
Moderators: Rick, Lance Murray
- Dominyc123
- 1 Diamond Member
- Posts: 6
- Joined: Mon Jun 03, 2019 2:19 am
- First Name: Dominic
- Aircraft Type: DA40
- Aircraft Registration: N445DS
- Airports: KLOT
- Been thanked: 4 times
- cptndavid
- 3 Diamonds Member
- Posts: 188
- Joined: Mon Aug 17, 2015 9:59 pm
- First Name: David
- Aircraft Type: DA42
- Aircraft Registration: N16FA
- Airports: N87
- Has thanked: 157 times
- Been thanked: 56 times
Re: Avionics upgrade and edm 900 location.
It looks as if it is time for a new panel. you could then be rid of all of those plates and covers and your panel would look fresh.
- blsewardjr
- 4 Diamonds Member
- Posts: 485
- Joined: Tue Jul 26, 2011 11:19 pm
- First Name: Bernie
- Aircraft Type: DA40
- Aircraft Registration: N377DS
- Airports: KCHO
- Has thanked: 120 times
- Been thanked: 146 times
Re: Avionics upgrade and edm 900 location.
I would put it vertical in the space above where it is now. That way you're not looking as far down for RPM/MP at key moments, especially on an approach.
Bernie Seward, IR, AGI
2003 DA40 N377DS
KCHO Charlottesville, VA
2003 DA40 N377DS
KCHO Charlottesville, VA
- Dominyc123
- 1 Diamond Member
- Posts: 6
- Joined: Mon Jun 03, 2019 2:19 am
- First Name: Dominic
- Aircraft Type: DA40
- Aircraft Registration: N445DS
- Airports: KLOT
- Been thanked: 4 times