Air in the tire without removing fairing

Any DA40 related topics

Moderators: Rick, Lance Murray

User avatar
astaib
5 Diamonds Member
5 Diamonds Member
Posts: 616
Joined: Mon Feb 26, 2018 9:00 pm
First Name: Arnaud
Aircraft Type: DA40
Aircraft Registration: FGNJX
Airports: LFPX
Has thanked: 244 times
Been thanked: 51 times

Air in the tire without removing fairing

Post by astaib »

Hello,

Everything is in the title!

Do you succeed to add air in the tire without removing the fairings?

My fairings has only a little round hole but it is impossible to access the air valve to add air.

As I’m repairing my fairing, I’m asking myself about making a modification on the hole to make ovoid and a bit larger.

Any idea? Or experience?

Thanks.

Arnaud.
Arnaud
DA40 Star 180 / 40.026 / 2001
Wingtip, landing and taxing LED (Whelen)
Skitube
GNS430 NON-WAAS
Steam gauges
Non certified ADS-b
User avatar
Rich
5 Diamonds Member
5 Diamonds Member
Posts: 4592
Joined: Mon Aug 30, 2010 12:40 pm
First Name: Rich
Aircraft Type: DA40
Aircraft Registration: N40XE
Airports: S39 Prineville OR
Has thanked: 145 times
Been thanked: 1180 times

Re: Air in the tire without removing fairing

Post by Rich »

I've also pondered making those holes a bit bigger. I would want to take some care to make it look like they always the larger size/shape. Meanwhile I have been able to add air as they are. I put the plane on jacks to make it a bit easier. Plus I can check the bearings are smooth, brakes don't drag, etc.
2002 DA40-180: MT, PowerFlow, 530W/430W, KAP140, ext. baggage, 1090 ES out, 2646 MTOW, 40gal., Surefly, Flightstream 210, Orion 600 LED, XeVision, Aspen E5
User avatar
Sandy
4 Diamonds Member
4 Diamonds Member
Posts: 247
Joined: Mon Apr 04, 2016 12:30 pm
First Name: Sanford
Aircraft Type: DA40
Aircraft Registration: N159PS
Airports: KPDK
Has thanked: 11 times
Been thanked: 48 times

Re: Air in the tire without removing fairing

Post by Sandy »

I found it faster and easier to just remove the fairings, but now I’ve just been leaving them in my hangar.

Also, I just got a Ryobi inflator, and it works very well.

Sandy
User avatar
Boatguy
5 Diamonds Member
5 Diamonds Member
Posts: 1827
Joined: Mon Jan 22, 2018 4:48 am
First Name: Russ
Aircraft Type: DA62
Aircraft Registration: N962M
Airports: KSTS
Has thanked: 1328 times
Been thanked: 1163 times

Re: Air in the tire without removing fairing

Post by Boatguy »

It is an awful design. Certainly not designed for maintenance! Here is my procedure.

- I created an extension by screwing together two metal valve stem extensions purchased at a local auto parts store and applying Locktite to the threads. The Locktite ensures the extension won't come apart. These extensions have a ball in the end that prevents air from escaping when they are attached.

- I move the plane fore/aft as needed to position the valve stem where I can screw the extension onto the stem. I marked the tires with some white paint so that it's easy to find the easiest position for each tire each month

- I attach a Milwaukee tire inflator (could be Ryobi or whatever brand you prefer) to the extension and it inflates to the specified pressure.

The nose wheel was the worst so I had my shop enlarge that hole, but use the same procedure.
User avatar
chili4way
5 Diamonds Member
5 Diamonds Member
Posts: 523
Joined: Fri Jun 08, 2018 10:51 pm
First Name: Paul
Aircraft Type: DA40NG
Aircraft Registration: N718NG
Airports: KADS
Has thanked: 1057 times
Been thanked: 482 times

Re: Air in the tire without removing fairing

Post by chili4way »

Here's what I use and do on my DA40NG (so your fairing may be different). The example is the particularly challenging nose landing gear. It's the original hole size. I move the valve to the upper right corner of the hole and take off the valve cover. Then I snake the inflator valve under the wheel fairing (see photo) and up to the valve. This positioning gives me just enough clearance for the lever on the inflator to operate using the hole as clearance.


inflate-NLG.jpg
ryobi-inflator.jpg
User avatar
Steve
5 Diamonds Member
5 Diamonds Member
Posts: 1953
Joined: Thu Aug 12, 2010 1:23 am
First Name: Steve
Aircraft Type: DA40
Aircraft Registration: N432SC
Airports: 1T7
Has thanked: 81 times
Been thanked: 493 times

Re: Air in the tire without removing fairing

Post by Steve »

This is what I use on mine (2001 with the small access holes):

https://www.miltonindustries.com/gauges ... -gage.html

Key is getting the tire valve exactly aligned with the access hole.
User avatar
perossichi
3 Diamonds Member
3 Diamonds Member
Posts: 188
Joined: Tue Sep 18, 2018 4:05 am
First Name: Peter
Aircraft Type: DA40
Aircraft Registration: N925RH
Airports: KVNY
Has thanked: 31 times
Been thanked: 75 times

Re: Air in the tire without removing fairing

Post by perossichi »

I find that, with a 1.5 inch valve extender, I can attach my compressor hose screw in fitting to either fill the tire or take the pressure. Of course, you have to roll the wheel very precisely to center the valve in the middle of the wheel fairing hole. This makes the process much more tedious than it should be.

Given the tendency of the nose wheel “cork” to the right and how hard it is to check the nose tire pressure, one might easily argue that you should leave the nose fairing off. whatever reduction in drag is achieved by the fairing is just not worth it.

But I use the Brett fin and I swear a lot when taking the tire pressure of the nose tire.
Sold 2002. Powerflo, Hartzell composite two blade, 530W/430, 345 transponder.
User avatar
astaib
5 Diamonds Member
5 Diamonds Member
Posts: 616
Joined: Mon Feb 26, 2018 9:00 pm
First Name: Arnaud
Aircraft Type: DA40
Aircraft Registration: FGNJX
Airports: LFPX
Has thanked: 244 times
Been thanked: 51 times

Re: Air in the tire without removing fairing

Post by astaib »

I see that I’m not the only one with this « issue »!!!
Why didn’t you enlarge the hole ?
Only for aesthetic reasons?
Arnaud
DA40 Star 180 / 40.026 / 2001
Wingtip, landing and taxing LED (Whelen)
Skitube
GNS430 NON-WAAS
Steam gauges
Non certified ADS-b
User avatar
Keith M
4 Diamonds Member
4 Diamonds Member
Posts: 363
Joined: Sun Jun 19, 2011 9:54 am
First Name: Keith
Aircraft Type: DA40D
Airports: EGNH
Has thanked: 29 times
Been thanked: 46 times

Re: Air in the tire without removing fairing

Post by Keith M »

Here's my tyre inflation kit. The bent wire on the right hand side of the kneeling pad was formed from a coat hanger and is used to grab the valve tube and pull it to the front of the access hole, so that the extender tube can be screwed on.
Attachments
TyreKitSm.jpg
User avatar
astaib
5 Diamonds Member
5 Diamonds Member
Posts: 616
Joined: Mon Feb 26, 2018 9:00 pm
First Name: Arnaud
Aircraft Type: DA40
Aircraft Registration: FGNJX
Airports: LFPX
Has thanked: 244 times
Been thanked: 51 times

Re: Air in the tire without removing fairing

Post by astaib »

Hello,

Some pics of the enlargement that I tried and it’s perfect!
I still have to test it for the nose wheel.
E7E15272-C645-4456-9E93-99FB1F6E2990.jpeg
BD85892C-03C5-4781-A924-01A586AE7EA9.jpeg
Arnaud
DA40 Star 180 / 40.026 / 2001
Wingtip, landing and taxing LED (Whelen)
Skitube
GNS430 NON-WAAS
Steam gauges
Non certified ADS-b
Post Reply