Thanks for posting this. This exact issue came up on an flight yesterday. When the cursor was on the preceding waypoint, no T routes. Fortunately this post came to mind. I scrolled down to the blank field and tried again. Success!Boatguy wrote: ↑Sat Mar 26, 2022 5:17 pm
2) Removed the T route, which also removed SLI, then inserted it again at the panel. I was able to do that, but I did find a quirk. If the cursor was on SMO when I hit the menu, then I couldn't load an Airway. The cursor had to be in the blank Enroute space between SMO and the Destination. Then the T route was in the menu and I could select it with the SLI exit.
So the entry waypoint has to be in the Flight Plan and the cursor needs to be on the line below the entry waypoint. My guess is that's what tripped up Troy, the cursor was on ODDEL, rather than the next line down.
Tango airways?
Moderators: Rick, Lance Murray
- tjmoody
- 3 Diamonds Member
- Posts: 93
- Joined: Tue Oct 27, 2020 8:52 pm
- First Name: Trevor
- Aircraft Type: DA42-VI
- Aircraft Registration: N62DL
- Airports: KRNT
- Has thanked: 124 times
- Been thanked: 68 times