Page 1 of 3

Spare G1000 Range Knob?

Posted: Wed May 20, 2015 4:37 am
by BkFlyer
One of the G1000 map range knobs cracked and fell off recently. I know that I can buy a full expensive knob set online. I was wondering if anyone happened to have a spare knob from a previously purchased set, or knows of a site that sells then a la carte.

Thanks!

Re: Spare G1000 Range Knob?

Posted: Wed May 20, 2015 1:58 pm
by rwtucker
I'm on the road Adam and can't easily drill down further but companies like Garmin buy knobs from stock types.

Allied Electronics has been a high quality parts vendor for many decades. Chances are good that an identical knob is somewhere in Allied's 140 web pages of ~20 knobs per page. Most of the knobs they list have PDF spec sheets. When you see Allied's prices, Garmin's prices may irritate you a bit more than they already do.

http://www.alliedelec.com/search/result ... term=knobs

Re: Spare G1000 Range Knob?

Posted: Thu May 21, 2015 12:15 pm
by Rick
I had the same problem a year ago, my MFD range knob cracked and then fell apart. I moved the PFD knob to the MFD, since it gets the most use. I dislike the missing knob, but not enough to pay Garmin's price for a new one! :shock: I did some searching a while ago, but never found anything. If you find a suitable replacement, I would love to know about it.

Re: Spare G1000 Range Knob?

Posted: Thu May 21, 2015 7:21 pm
by rwtucker
I scanned the 2,700 or so stock knobs at Allied and saw a few that look close. Also found close matches for the other G1000 knobs. I would have to drive to the hangar and get the exact measurements to be sure.

Mouser is another good source. They show over 1,000 knobs. http://www.mouser.com/Search/Refine.aspx?Keyword=knobs

EHC claims to have the world's largest selection of knobs. http://ehcknobs.com/index.php?id=CK1

Re: Spare G1000 Range Knob?

Posted: Sat Jul 01, 2017 6:03 pm
by Lance Murray
I just saw your post/message. I still have a knob set missing one or two knobs sitting in my tool box. Yes I had to buy the whole set to get one knob. Thanks for nothing Garmin.

Re: Spare G1000 Range Knob?

Posted: Fri Sep 15, 2017 4:05 pm
by Kurt h
Did anyone find a way to replace a single knob, either from Garmin or the aftermarket catalogs mentioned? Cracked the small FMS knob. Robbed the one from the altimeter setting on the PFD I never use, but still would like to replace it.
IMG_0380.JPG

Re: Spare G1000 Range Knob?

Posted: Fri Sep 29, 2017 2:39 am
by BkFlyer
Nope.

I have been using the range knob stem for months. Actually about to order a new set since it seems like more knobs will crack soon as the plane turns 10 yrs old.

Re: Spare G1000 Range Knob?

Posted: Wed Apr 17, 2019 3:10 pm
by smoss
Has anyone found a distributor that sells the G1000 knob set for a reasonable price?

Re: Spare G1000 Range Knob?

Posted: Wed Apr 17, 2019 5:46 pm
by BkFlyer
The price is high due to Garmin, not greedy distributors. Unfortunately I have searched far and wide and never found any seller that was not in the $100+ range for the knob set.

Re: Spare G1000 Range Knob?

Posted: Wed Apr 17, 2019 6:14 pm
by smoss
geeze, I'll take $100 range, I've only found 220+. Any names/links?