I have an inop (damaged) remote panel mount ELT switch that Diamond used in the early XLS series.
Artex lists the design as discontinued. Does anyone know where I can locate one of these (new or used)?
Replacement Remote Switch for Artex ME406P
Moderators: Rick, Lance Murray
- Chris B
- 5 Diamonds Member
- Posts: 843
- Joined: Wed Sep 26, 2012 1:52 am
- First Name: Chris
- Aircraft Type: DA40
- Aircraft Registration: N171CB
- Airports: KRHV
- Has thanked: 210 times
- Been thanked: 215 times
Re: Replacement Remote Switch for Artex ME406P
No guarantees, but I'd start with Brittany at Premier, who is excellent:
https://premieraircraftservice.com/aircraft-parts-shop/
Chris
https://premieraircraftservice.com/aircraft-parts-shop/
Chris
-
- 2 Diamonds Member
- Posts: 20
- Joined: Sat Feb 18, 2023 1:51 pm
- First Name: Christof
- Aircraft Type: DA42-VI
- Aircraft Registration: TBA
- Airports: LOxx
- Has thanked: 7 times
- Been thanked: 6 times
Re: Replacement Remote Switch for Artex ME406P
Do you have a partnumber? In addition to the PN a picture would be also great.
I might have one left over in the hangar.
- rwtucker
- 5 Diamonds Member
- Posts: 1283
- Joined: Thu Feb 21, 2013 11:24 pm
- First Name: Rob
- Aircraft Type: DA40
- Aircraft Registration: N831BA
- Airports: KFFZ KEUL
- Has thanked: 100 times
- Been thanked: 110 times
Re: Replacement Remote Switch for Artex ME406P
Thanks Chris and Christof! I'm headed to the hangar to get more info. Back later.
- rwtucker
- 5 Diamonds Member
- Posts: 1283
- Joined: Thu Feb 21, 2013 11:24 pm
- First Name: Rob
- Aircraft Type: DA40
- Aircraft Registration: N831BA
- Airports: KFFZ KEUL
- Has thanked: 100 times
- Been thanked: 110 times
Re: Replacement Remote Switch for Artex ME406P
- The ELT is Artex ME406
- The part in question is listed as a kit by Artex under the number 453-0023
- The frontispiece template number is 591-3029
- The entire unit is 570-0023
- If not confusing enough, in another document supplied by Diamond, I see a 455-0023 number for the enture unit.
- It mounts in a 38.3mm x 17mm cutout on the upper right hand side of the panel
- A female RJ-12 (standard telephone) is on the rear of the part
- Inside the part is a 5-year replicable 28L Duracell lithium battery (only powers the tiny LED so AFAIK)
- Below are drawings plus a panel image
- I can find parts that match the front look but they do not have the RJ-12 receptacle on the back. They are for a newer model.
- I can always rewire if I can't locate an original part.
- The part in question is listed as a kit by Artex under the number 453-0023
- The frontispiece template number is 591-3029
- The entire unit is 570-0023
- If not confusing enough, in another document supplied by Diamond, I see a 455-0023 number for the enture unit.
- It mounts in a 38.3mm x 17mm cutout on the upper right hand side of the panel
- A female RJ-12 (standard telephone) is on the rear of the part
- Inside the part is a 5-year replicable 28L Duracell lithium battery (only powers the tiny LED so AFAIK)
- Below are drawings plus a panel image
- I can find parts that match the front look but they do not have the RJ-12 receptacle on the back. They are for a newer model.
- I can always rewire if I can't locate an original part.
- rwtucker
- 5 Diamonds Member
- Posts: 1283
- Joined: Thu Feb 21, 2013 11:24 pm
- First Name: Rob
- Aircraft Type: DA40
- Aircraft Registration: N831BA
- Airports: KFFZ KEUL
- Has thanked: 100 times
- Been thanked: 110 times
Re: Replacement Remote Switch for Artex ME406P
Update:
I located a supplier that had the needed part in stock (sold as Artex 455-0023, the complete kit for the panel including a new battery, if you are unfortunate enough to need one): $308.
I located a supplier that had the needed part in stock (sold as Artex 455-0023, the complete kit for the panel including a new battery, if you are unfortunate enough to need one): $308.