just got my DA20 serviced. they said my Tachometer is going crazy. I put the aircraft on idle and the RPMs shot up past redline, however the engine runs at idle and runs normal.
I was told it might be the tach unit or the cable. anyone got part numbers for these? I cant find it in the parts list.
thanks
Tachometer going crazy
Moderators: Rick, Lance Murray
- Pascal
- 3 Diamonds Member
- Posts: 165
- Joined: Sun May 15, 2016 3:35 am
- First Name: Pascal
- Aircraft Type: DA20-C1
- Aircraft Registration: CGSMT
- Airports: CYJN
- Has thanked: 40 times
- Been thanked: 33 times
Re: Tachometer going crazy
I had the tachometer replaced on my DA20-C1 1999 as part of the prepurchase inspection as its readings were out of the allowable tolerance as per the maintenance manual.
Part number: SL1010-55003-13-N00
Other data applicable: FAA TSO C49b & SAE AS 404B
Manufactured by Superior Labs inc., Hot Springs, Arkansas. Cage Code 0YU27
Part number: SL1010-55003-13-N00
Other data applicable: FAA TSO C49b & SAE AS 404B
Manufactured by Superior Labs inc., Hot Springs, Arkansas. Cage Code 0YU27
- Diamond13
- 3 Diamonds Member
- Posts: 96
- Joined: Thu Apr 14, 2011 4:44 pm
- First Name: Robert
- Aircraft Type: DA40
- Aircraft Registration: CYXU
- Airports: CYXU
- Been thanked: 15 times
Re: Tachometer going crazy
A small point, but important, ensure the cable fitting is not too tight on either end, if over-tightened, tachometer will give erratic readings....
- krellis
- 4 Diamonds Member
- Posts: 342
- Joined: Fri Apr 29, 2011 10:42 am
- First Name: Keith
- Aircraft Type: OTHER
- Aircraft Registration: N853DF
- Airports: GA04
- Has thanked: 1 time
- Been thanked: 63 times
Re: Tachometer going crazy
Superior Labs also supplies the mechanical tach for the A1. Cable too if I recall correctly. They should be able to rebuild your tach if you have time. I would call them as they are pretty responsive. At least they were years ago when we replaced our tach for a similar failure.
If you replace the cable, you'll also need the two part PRC Desoto high temp polysulfide sealant for the firewall pass through.
It's not a difficult job, just not inexpensive.
If you replace the cable, you'll also need the two part PRC Desoto high temp polysulfide sealant for the firewall pass through.
It's not a difficult job, just not inexpensive.
- katanajer
- 3 Diamonds Member
- Posts: 52
- Joined: Fri Jan 02, 2015 4:23 pm
- First Name: jerry
- Aircraft Type: DA20-A1
- Aircraft Registration: N175LE
- Airports: KFUL
- Has thanked: 2 times
- Been thanked: 5 times
Re: Tachometer going crazy
thanks guys i'll keep checking it out, hopefully its not going to cost me an arm and a leg