At annual on DA 40 NG pedals?

helidoc67 · Post by **helidoc67** » Sat Oct 02, 2021 9:42 am

Does anyone know if they service or adjust the foot pedals when doing the annual?

Thanks

astaib · Post by **astaib** » Sat Oct 02, 2021 10:30 am

Hello,

I don’t think so, but you can have a look in the AMM to check if it’s an item.

Arnaud.

chili4way · Post by **chili4way** » Mon Oct 04, 2021 9:43 pm

helidoc67 wrote: ↑Sat Oct 02, 2021 9:42 am Does anyone know if they service or adjust the foot pedals when doing the annual?

The DA 40 NG AMM (page 9 in section 05-28-50, item 12) calls for inspection, but not necessarily adjustment at the annual (and 100 hours).

Incorrect attachment and function.
Corrosion and damaged surface protection.
Damaged adjustment mechanism.
Improper function of adjustment mechanism.

Why do you think your pedals might need adjusting? Perhaps it's the rudder trim tab or the NLG tension that needs adjusting.

helidoc67 · Post by **helidoc67** » Tue Oct 05, 2021 1:21 am

The pull cord does not move the collar that I suspect allows travel of the pedals with pressure when trying to adjust. When i pull on the cable it seems stretched.

chili4way · Post by **chili4way** » Tue Oct 05, 2021 12:08 pm

Yes, this should be addressed during the annual inspection (to your original question) per the AMM.

helidoc67 · Post by **helidoc67** » Tue Oct 05, 2021 1:01 pm

Issue noticed after the annual

At annual on DA 40 NG pedals?

At annual on DA 40 NG pedals?

Re: At annual on DA 40 NG pedals?

Re: At annual on DA 40 NG pedals?

Re: At annual on DA 40 NG pedals?

Re: At annual on DA 40 NG pedals?

Re: At annual on DA 40 NG pedals?