Looking for recommendations on best iPad MINI mount for DA62.
Seems RAM mount is most popular but which model is best to mount and position iPad mini as far left as possible away from panel etc.
Thanks
Jim
Best Pivot mount for DA62
Moderators: Rick, Lance Murray
- Jimhartley
- 2 Diamonds Member
- Posts: 14
- Joined: Sat Oct 23, 2021 7:17 pm
- First Name: Jim
- Aircraft Type: DA62
- Aircraft Registration: GGJIM
- Airports: EGCM
- Has thanked: 5 times
- Been thanked: 6 times
Re: Best Pivot mount for DA62
I use a Pivot case with the iPad Mini 6th gen. An arm around 4 inches attached to the ball mount works really well. The pencil is right there, the door opens and the air from the vent just about gets past it. The Pivot case is in my opinion the very best on the market. I usually slip the iPad off the mount to copy clearances. It takes less time than picking up a notepad.
- Zebedee
- 3 Diamonds Member
- Posts: 53
- Joined: Wed Jun 09, 2021 8:14 pm
- First Name: Jim
- Aircraft Type: DA62
- Aircraft Registration: N316JZ
- Airports: KPOV KPGD
- Been thanked: 20 times
Re: Best Pivot mount for DA62
Did you use the PIVOT Single Suction Cup Mount, or is there a better combination out there to position the mini more out of the way?
https://pivotcase.com/suction-cup-mount/
Thanks
https://pivotcase.com/suction-cup-mount/
Thanks
- Rich
- 5 Diamonds Member
- Posts: 4608
- Joined: Mon Aug 30, 2010 12:40 pm
- First Name: Rich
- Aircraft Type: DA40
- Aircraft Registration: N40XE
- Airports: S39 Prineville OR
- Has thanked: 145 times
- Been thanked: 1187 times
Re: Best Pivot mount for DA62
The thing about suction cups? Plan for it to drop on your lap, on the floor, etc. after significant altitude gains. For me it's usually around 4-5,000 ft. that my iPhone/mount drops on the seat.
2002 DA40-180: MT, PowerFlow, 530W/430W, KAP140, ext. baggage, 1090 ES out, 2646 MTOW, 40gal., Surefly, Flightstream 210, Orion 600 LED, XeVision, Aspen E5
- Boatguy
- 5 Diamonds Member
- Posts: 1866
- Joined: Mon Jan 22, 2018 4:48 am
- First Name: Russ
- Aircraft Type: DA62
- Aircraft Registration: N962M
- Airports: KSTS
- Has thanked: 1366 times
- Been thanked: 1196 times
Re: Best Pivot mount for DA62
I use a RAM mount. The EZ-Rollr cradle holds the iPad and a double socket medium length arm attaches to the ball.
- steve_falconer
- 3 Diamonds Member
- Posts: 95
- Joined: Sun Mar 12, 2023 8:19 am
- First Name: Steve
- Aircraft Type: DA40
- Aircraft Registration: N263DS
- Airports: KMHR
- Has thanked: 62 times
- Been thanked: 35 times
Re: Best Pivot mount for DA62
In case it matters for others, I’ve used a Pivot mount suction cup on my DA40 canopy window and it has always been secure. Months abd months installed abd even after being repositioned. It holds much better than my RAM Mount suction cup for Status which does fall off regularly, although I no longer use it except for AHRS/ADS-B In backup.
Low Profile Suction Cup Mount
https://flyboys.com/collections/pivot-s ... vot-815ppk
IPad Mini 6th Gen Case
https://flyboys.com/products/pivot-t21a
2003 DA40-180: MT, PowerFlow, G500 TXi/GDU1060, GI275, 530W/430W, KAP140, 2646 MTOW, 40gal., Surefly/Rt Mag, GDL88, Flightstream 210, Whalen LED Strobes, PMA450B
- Zebedee
- 3 Diamonds Member
- Posts: 53
- Joined: Wed Jun 09, 2021 8:14 pm
- First Name: Jim
- Aircraft Type: DA62
- Aircraft Registration: N316JZ
- Airports: KPOV KPGD
- Been thanked: 20 times
Re: Best Pivot mount for DA62
Thanks for the update on Pivot Suction mount. I was regretting not getting the fixed airplane mount. I will try pivot case and mount. Hoping the extension of the arm is enough on the DA62 to clear obstacles and keep all the way to the left.
Thanks
Jim
Thanks
Jim